What should be paid attention to after installing rubber pipes

The characteristics of rubber pipes include physiological inertia, UV resistance, ozone resistance, high and low temperature resistance (-80 to 300 degrees), high transparency, strong rebound force, compression resistance without deformation, oil resistance, stamping resistance, acid and alkali resistance, wear resistance, flame retardancy, voltage resistance, conductivity, and other properties. If the rubber hose is installed, do you know how to maintain it later? Let's take a look together:

It is very important to determine the length of the rubber hose you need, and at the same time, check whether the usage conditions of the rubber hose meet the requirements of the selected rubber hose. You should ensure that the rubber hose you will be using is suitable. Caution should be exercised in determining the working pressure and suction values. Special attention should be paid to the fact that sudden pressure changes or pressure peaks exceeding the allowable maximum values will greatly shorten the lifespan of rubber pipes. The two ends of the rubber tube cannot be continuously immersed in the conveyed material.

If you make the bending radius of the rubber tube smaller than the specified lower value when installing it, the service life of the rubber tube will be greatly shortened. Therefore, before installation, it is recommended that you consult information, especially regarding the bending radius of the rubber tube. After use, it is recommended that you empty the rubber tube. If necessary, cleaning should be carried out. After each use, the rubber tube must be checked to ensure that there is no structural damage. If the rubber tube is subjected to severe pressure during use or if the outer layer of the rubber tube will come into contact with the conveyed liquid for a long time, it is recommended to conduct a hydraulic test.